What are the JKR specifications for road signage in Malaysia? Jabatan Kerja Raya (JKR) publishes a series of Arahan Teknik (Jalan) manuals that address the design and application of traffic signs, temporary work-zone signs, guide signs and road markings. A compliant road sign is not simply an aluminium panel with a familiar symbol. Its approved drawing, dimensions, face material, retroreflectivity, mounting and placement must match the applicable road-authority or project specification.
This guide helps project owners, consultants, contractors and site managers understand which JKR reference to consult, what a sign schedule should contain and how to request a meaningful fabrication quotation. It is not a replacement for an approved engineering drawing or the full technical manuals. For custom road signage fabrication enquiries, see Elite Sign’s road signage service.
Which JKR manuals cover traffic signs?
| Reference | Main subject | When to consult it |
|---|---|---|
| Arahan Teknik (Jalan) 2A/85 | Standard Traffic Signs | Standard regulatory, warning and guide sign drawings, dimensions and colours |
| Arahan Teknik (Jalan) 2B/85 | Traffic Sign Applications | Design criteria, selection and location of signs |
| Arahan Teknik (Jalan) 2C/85 and relevant amendments | Temporary Signs and Work Zones Control | Traffic control during construction, maintenance and temporary roadworks |
| Arahan Teknik (Jalan) 2D/85 and relevant amendments | Road Marking and Delineation | Road lines, markings and delineation—not a substitute for sign drawings |
| Arahan Teknik (Jalan) 2E/87 and relevant amendments | Guide Signs Design and Application | Directional, destination and other road guide signs |
These documents address different aspects of road traffic control. For example, choosing a warning-sign symbol from 2A does not by itself determine how far ahead of a hazard the sign must be installed; the approved application and location requirements also matter. Similarly, a traffic-management plan for a temporary roadworks zone is not identical to permanent signage for a completed road.
Official references: JKR technical documents listing and JKR Selangor Arahan Teknik (Jalan) index. JKR documents may have amendments or project-specific supplements; the approving engineer should confirm which editions apply.
Regulatory, warning and guide signs: what is the difference?
Regulatory signs
Regulatory signs communicate traffic controls or restrictions, such as stopping or turning requirements. Their appearance and wording should follow the relevant approved standard drawings rather than a designer’s preferred icon style. A wrong colour, shape or symbol can cause confusion and undermine the intended control.
Warning signs
Warning signs alert road users to conditions such as a junction, bend or other hazard. The symbol, position, viewing distance and approach conditions all affect whether a driver has enough time to understand the warning. A sign that is technically printed correctly but hidden behind vegetation is not useful in practice.
Guide signs
Guide signs help drivers navigate towards routes and destinations. Lettering, arrows, panels, colours and the information hierarchy depend on the road and approved guidance. A destination sign intended for moving traffic is a different product from an indoor directory or a commercial advertising sign.
If you are looking for the meaning of a common crossroad warning, our four-way junction road sign guide explains the distinction between a junction warning and STOP control.
How are JKR road sign dimensions determined?
For public-road work, dimensions should come from the applicable standard drawing, sign code, road category and the approved project schedule. Do not scale a sample image from the internet or assume every STOP, warning or guide sign has one universal size in every location. The approved drawing may prescribe the sign face, borders, symbols, lettering and mounting arrangement.
A useful fabrication enquiry therefore includes the sign code or drawing reference, the dimensions in millimetres, the number of units and the relevant project specification. If these details are missing, a competent consultant or road authority should clarify them before a manufacturer commits to a final panel size.
Reflective road signs: what does retroreflectivity mean?
Retroreflective sheeting sends a significant portion of incoming headlight illumination back towards the light source, helping traffic signs remain visible at night. Different materials and performance grades exist, and their suitability depends on the approved road and project requirements. “Reflective sticker” is not a sufficient technical specification by itself.
Malaysia’s MS 1216:2003, Specification for Retroreflective Sign Face Materials (First Revision), is an official Malaysian Standard concerned with coloured retroreflective sheeting and screen-printed sign-face materials used for permanent and temporary traffic signs. The relevant Malaysian Standard or other specified testing standard should be checked against the project documents and current requirements.
For sign procurement, ask the engineer or authority which sheeting grade, performance criteria, colour and test requirements apply. The grade used on a traffic-control sign should not be selected only from a supplier’s marketing label. Some projects may also have specific sign-plate, structural and installation requirements.
See Department of Standards Malaysia’s standards catalogue and JKR’s official Arahan Teknik documents for the referenced standards and specifications.
What materials are used for the sign face and support?
Road signs generally require a defined sign plate or substrate, approved sign-face material and a support system capable of remaining secure in the intended location. Details may include metal thickness, stiffeners, corrosion protection, bolts, clamps and posts. The correct specification depends on the sign type and project drawings.
An ordinary printed ACP shop fascia should not be assumed to meet a road-sign specification merely because it looks similar. Likewise, a reflective vinyl marketed for indoor displays should not be substituted for a specified traffic-sign sheeting product without approval.
Check the whole assembly: face panel, backing or stiffeners, posts, foundations, fasteners and clearance. Wind exposure, underground utilities, roadside conditions and maintenance access can influence the engineered installation.
Where should a JKR traffic sign be placed?
Sign placement is a design decision involving the relevant approach speed, sightline, traffic environment, road geometry and approved application rules. The sign must be visible soon enough for road users to respond safely, without blocking pedestrian paths or creating an additional hazard.
Do not copy a mounting height, lateral offset or advance-warning distance from a random image. The correct arrangement should follow the current approved manual, authority instruction and engineering drawing for the site. A sign fixed correctly to a post can still be non-compliant if placed in the wrong location.
Temporary roadworks signs are a different category
Construction zones may require temporary warning, regulatory and directional signs to guide traffic safely past changing work areas. Arahan Teknik (Jalan) 2C/85 and its applicable amendments address temporary signs and work-zone control. The signage must follow the traffic management plan rather than being improvised at the time of installation.
A temporary sign may need to be relocated as the works progress. Contractor coordination, sightlines, secure supports and maintenance checks are therefore important. A work-zone sign that falls over, is covered in mud or remains after the traffic layout changes can give drivers the wrong information.
Public roads versus industrial estates and private sites
Public-road signage should follow the responsible road authority’s requirements and approved technical documents. On a private industrial estate, warehouse compound or factory access road, the owner may use traffic-control and directional signs as part of an approved site traffic plan. However, private ownership does not mean safety and building requirements can be ignored.
Industrial signs may include speed notices, pedestrian crossing warnings, truck-route boards, delivery access instructions and forklift or vehicle restrictions. Their specification should come from the site’s risk assessment and approved traffic plan. Standard public-road symbols should not be casually altered to match a brand identity.
JKR road sign quotation checklist
Before requesting prices, prepare a list of each sign and its approved technical information. A practical schedule should include:
- Sign code and drawing: reference to the applicable JKR or project-approved sign design.
- Quantity: how many of each sign are required.
- Dimensions: the size and shape required by the drawing, using the specified units.
- Face specification: sign-plate material, finishing and retroreflective sheeting requirements.
- Support arrangement: post dimensions, clamps, stiffeners, foundation and other structural details if part of the work.
- Location: coordinates, chainage, site photographs or an approved location plan.
- Installation scope: whether the contract includes foundations, traffic management, access equipment and removal of old signs.
- Approvals: responsible road authority, supervising officer and inspection or quality-documentation requirements.
Ask suppliers to identify exclusions as clearly as inclusions. A price for sign-face fabrication alone is not equivalent to a supplied-and-installed road sign that requires site works and traffic management.
How to check a completed road sign
Quality control should confirm that the completed face matches the approved drawing, the symbol and colours are correct, the sign material and reflectivity meet the specified requirements, the structure is secure and the installed location is correct. Checks may also include inspection of surface defects, visible fasteners, damaged reflective sheeting and obstruction of the sign by nearby objects.
For public road projects, the responsible engineer or road authority determines acceptance. A sign maker should not claim a road sign is “JKR approved” simply because a commonly recognised symbol is used.
Requesting custom road signs in Shah Alam and Selangor
Elite Sign discusses fabrication of appropriate road signs and directional signboards for commercial and suitable project requirements. If the sign is intended for public-road use, please provide the relevant approved drawings, specifications and authority instructions. Approval, technical design and installation authorisation remain the responsibility of the appointed project team and relevant authorities.
Send the sign schedule, quantities, proposed materials and location photographs using our contact page. This helps us assess fabrication scope without guessing at compliance requirements.
Frequently asked questions
Is there one standard JKR road sign size in Malaysia?
No. Dimensions depend on the sign type and applicable approved drawing. Use the correct JKR reference and project specifications rather than copying a generic online size chart.
What is the difference between JKR 2A/85 and 2B/85?
2A/85 covers standard traffic sign drawings, while 2B/85 addresses traffic sign application and placement criteria. They serve complementary purposes.
Are all road signs required to be reflective?
The required materials depend on the applicable authority and approved sign specification. Many traffic signs use retroreflective faces for visibility, but you must use the prescribed sheeting and performance requirements for the particular sign.
Can a standard shop signboard be used as a JKR road sign?
Do not assume so. Public-road signage needs the correct technical design, face material, support and location in accordance with the project and road authority requirements.
Can a sign maker provide the JKR approval?
Manufacturers can help fabricate to an approved specification. The applicable road authority and appointed qualified professionals are responsible for technical design acceptance and authorisation.
Reference note: JKR’s Arahan Teknik list and Department of Standards Malaysia sources were reviewed in November 2026. Project-specific specifications, later amendments and written authority instructions take precedence over this general guide.

2 comments